I have lost the install CD of my Novatel Merlin U740, an older PCMCIA UMTS card. As a consequence I got no “Mobilink Connection Manager” after installing Windows 7 on my notebook. Fortunately I found this guide by Novatel Wireless which explains how to connect using only on-board tools in Windows Vista, by setting up a dial-up connection. It still works in Windows 7. The important part is to set the APN as part of the driver’s initialization string.
The telephone number you have to set is
*99#, which should be provider-independent.
The following settings are for yesss.at only:
Remember to set the APN as part of the driver’s connection string in Window’s “Device Manager” as described in the PDF.
Again, for yesss.at this is:
For this to work properly, the SIM must not have a PIN set, as otherwise the SIM will be locked and the dialer cannot dial out. For me this is ok, as it is a pre-paid card which can hardly be abused if it gets stolen, but your situation might be different, so please consider the security implications. (I suspect that it should be possible to unlock the SIM card somehow using the
AT+CPIN=1234 command, but I did not research how to separate several initialization strings, as it did not work immediately.)
The solution works quite well for me, even under Windows 7. Disadvantage is that there is no way to tell the signal strength and exact mode of operation (despite the color-coded status led on the Merlin U740).